A German Hanger Structure is a modular, clear-span aluminium framework covered with heavy-duty PVC fabric that creates large, pillar-free covered space in a matter of days. Shridhar Tent House supplies, transports, installs and dismantles these structures on hire across India for exhibitions, weddings, corporate events, industrial storage and government functions. Clear spans run from 6 metres to 60 metres, with length extendable to any requirement in 5-metre modules.
The structure is built from an extruded aluminium alloy truss frame, assembled bay by bay and tensioned with a flame-retardant, waterproof PVC fabric roof. Because the load is carried entirely by the side frames, the interior is completely clear — no internal pillars, no obstructed sightlines, 100% usable floor area.
The system is bolted rather than welded, which is what makes a German Structure on Hire practical for temporary use. The same set of components can be configured as a 12-metre exhibition annexe on one project and a 40-metre storage hangar on the next. Side walls can be supplied as solid PVC, transparent panels, glass walls or ABS hard panels depending on the application.
We stock the full commercial range of clear-span widths:
Length is unlimited and extends in multiples of 5 metres. A 20m × 50m hangar, for example, is a 20-metre span with ten 5-metre bays.
Eave (side wall) height is fixed by span group: 4m for 6m to 15m spans, 5m for 20m to 30m spans, and 6m for 40m to 60m spans. Centre ridge height increases with the span width and is confirmed at quotation stage. Eave height matters commercially — it governs clearance for double-decker stall fabrication, stage and truss rigging, forklift and pallet movement, and ducting for HVAC or air-cooling systems.
A German Shed for Rent suits any project that needs large covered area without permanent construction:
We deliver and install German hanger structures across all four zones of India:
Material moves by trailer directly to site and our installation crew travels with it, so the same team that loads the structure erects it under supervision. An Aluminium German Hanger on Hire can therefore be mobilised to any state, and for locations outside these cities transport is quoted by distance from the nearest dispatch point.
Buying a hangar ties up capital in an asset used for a few weeks a year. A German Shed on Hire converts that into a project cost that matches the actual requirement, and removes the burden of off-season storage, fabric replacement and frame maintenance. Span and length are also re-specified for each project rather than fixed at the point of purchase.
The process begins with a site survey or a review of your site plan, covering ground condition, access for trailers, anchoring method and power availability. We then issue a written quotation covering the structure, flooring, side walls, transport, installation and dismantling, so the figure you approve is the figure you pay.
Structure drawings and covered-area calculations are provided where the venue or local authority requires documentation before setup. Shridhar Tent House has operated in this trade since 1984.
To book an Aluminium German Hanger on Hire, share your event dates, required span width, total length and site location. We will revert with a drawing, a covered-area calculation and a firm quotation, along with the installation schedule for your site. Request a quotation
A German hanger uses a rigid aluminium truss frame with a tensioned PVC roof, while a traditional tent relies on internal poles and guy ropes. The hanger gives a fully clear interior with no central pillars, far better weather resistance, and a flat vertical side wall that allows stalls, walls and ducting to be fitted right up to the edge.
We supply clear-span widths of 6m, 9m, 12m, 15m, 20m, 25m, 30m, 40m, 50m and 60m. Length is unlimited and extends in multiples of 5 metres, so a structure can be built to any covered area you need. Eave height is 4m, 5m or 6m depending on the span selected.
Eave height is 4 metres for 6m to 15m spans, 5 metres for 20m to 30m spans, and 6 metres for 40m to 60m spans. Centre ridge height rises with span width and is confirmed on the drawing issued with your quotation, since it depends on the exact configuration selected.
Pricing depends on covered area in square metres, rental duration, distance from the nearest dispatch point, and add-ons such as flooring, side wall type, lighting and cooling. Longer durations reduce the per-day rate. Share your span, length, dates and location and we will issue a firm written quotation.
Short-term hire typically starts from three days, which covers most exhibitions and weddings. There is no maximum. We supply German Structure on Hire on monthly and annual contracts for industrial storage, construction sites and long-running projects, with periodic inspection included.
A mid-size structure of around 20m × 50m is generally erected in two to four days with a full crew, depending on ground condition and site access. Larger spans and additional flooring or interior work extend this. We schedule installation to finish ahead of your setup date, not on it.
Yes. The roof uses coated PVC fabric that is waterproof and UV-resistant, and the frame is anchored to the ground with base plates, ground anchors or ballast depending on the surface. Structures are engineered for outdoor use through the season, with anchoring specified after the site survey.
Yes. A German Shed for Rent can be supplied with wooden or plywood platform flooring, carpeting, LED lighting, air conditioning or air coolers, glass or ABS hard side walls, transparent panels, and entry doors. These are quoted as line items so you fit out only what the project requires.
Yes. We deliver and install across North, South, West and East India on a regular basis, including metro cities and tier-two locations. Material travels by trailer with our own crew, so installation quality does not depend on a local subcontractor. Transport is quoted by distance from the nearest dispatch point.
For peak exhibition and wedding season, book four to six weeks ahead to secure the span you need. Large spans of 40m and above and long-duration industrial contracts should be confirmed earlier. Urgent requirements are handled subject to stock and crew availability — contact us and we will confirm the same day.